If you've been comparing 6200 series bearing price listings — 6201, 6205, 6208, 6210 and everything in between — and getting a different number on every site, that's normal, not a mistake. Retail listings, small-batch resellers, and factory-direct wholesale quotes are three different markets, and the number you should expect depends entirely on which one you're actually buying from.
This guide covers thirteen of the most commonly searched 6200 series models, gives realistic price tiers by order quantity, and answers the questions first-time buyers usually run into — including how branded bearings like NBC and HCH compare to generic factory pricing, and why "626ZZ" isn't actually part of this series at all.
Size: 10 × 30 × 9 mm
The smallest bore in the standard 6200 series and one of the most searched. Retail listings run $2–$6 per piece. Order 10–99 pieces and that falls to around $0.80–$1.50 each. At 100–999 pieces, expect $0.35–$0.60, and once you cross 1,000 pieces, pricing typically settles at $0.15–$0.30 per piece. It's a common fit in small motors, RC/hobby equipment, and light household appliances, which is why supply is deep and bulk pricing drops off quickly.
Size: 12 × 32 × 10 mm
Pricing tracks closely with the 6200ZZ, just a step up in bore size. Retail sits around $2–$6. Small-batch (10–99 pcs) runs $0.80–$1.60, mid-tier (100–999 pcs) is roughly $0.35–$0.65, and bulk (1,000+ pcs) lands at $0.16–$0.32 per piece.
Size: 15 × 35 × 11 mm
Retail typically runs $2.50–$7. At 10–99 pieces, figure $0.90–$1.80; at 100–999 pieces, around $0.40–$0.70; and at 1,000+ pieces, roughly $0.18–$0.35 per piece. This size shows up constantly in fan motors and small pumps, so it's another one produced at high volume.
Size: 17 × 40 × 12 mm
Retail runs $3–$8. Small-batch (10–99 pcs) pricing is around $1.00–$2.00, mid-tier (100–999 pcs) is about $0.45–$0.80, and bulk (1,000+ pcs) drops to $0.20–$0.40 per piece.
Size: 20 × 47 × 14 mm
One of the highest-volume sizes in the whole catalog — used everywhere from power tools to small gearboxes. Retail sits at $3.50–$9. At 10–99 pieces, expect $1.20–$2.40; at 100–999 pieces, $0.55–$0.95; and at 1,000+ pieces, $0.25–$0.48 per piece. "6204-2Z" and "6204ZZ" refer to the same double-shielded configuration and are usually priced identically — the "2Z" notation is just an alternate naming convention some suppliers use.
Size: 25 × 52 × 15 mm
Likely the single most searched bearing size on the internet, thanks to skateboard, e-bike, and go-kart builds. Retail runs $4–$10. Small-batch (10–99 pcs) is $1.50–$2.80, mid-tier (100–999 pcs) is $0.65–$1.10, and bulk (1,000+ pcs) is $0.30–$0.55 per piece.
Size: 30 × 62 × 16 mm
Retail is typically $5–$12. At 10–99 pieces, expect $1.80–$3.30; at 100–999 pieces, $0.80–$1.35; and at 1,000+ pieces, $0.38–$0.68 per piece. As with 6205, a branded 6206 (from suppliers like HCH) typically carries a modest premium over an equivalent generic commercial-grade bearing — the underlying tolerance and material can be comparable, but the brand documentation and traceability add cost.
Size: 35 × 72 × 17 mm
Retail runs $6–$15. Small-batch (10–99 pcs) pricing is $2.20–$4.00, mid-tier (100–999 pcs) is $1.00–$1.70, and bulk (1,000+ pcs) is $0.48–$0.85 per piece.
Size: 40 × 80 × 18 mm
Retail sits at $7–$18. At 10–99 pieces, figure $2.80–$5.00; at 100–999 pieces, $1.20–$2.10; and at 1,000+ pieces, $0.60–$1.05 per piece. Common in medium-duty motors and agricultural equipment.
Size: 45 × 85 × 19 mm
Retail runs $8–$20. Small-batch (10–99 pcs) is $3.20–$5.80, mid-tier (100–999 pcs) is $1.40–$2.40, and bulk (1,000+ pcs) is $0.70–$1.20 per piece. As with 6205, expect a branded version (NBC or similar) to sit above the generic factory range rather than inside it.
Size: 50 × 90 × 20 mm
Retail is around $9–$22. At 10–99 pieces, expect $3.60–$6.50; at 100–999 pieces, $1.60–$2.70; and at 1,000+ pieces, $0.80–$1.35 per piece.
Size: 55 × 100 × 21 mm
Retail typically runs $11–$26. Small-batch (10–99 pcs) is $4.50–$8.00, mid-tier (100–999 pcs) is $2.00–$3.30, and bulk (1,000+ pcs) is $1.00–$1.70 per piece.
Size: 60 × 110 × 22 mm
The largest bore on this list, and priced accordingly. Retail runs $13–$30. At 10–99 pieces, expect $5.50–$9.50; at 100–999 pieces, $2.40–$4.00; and at 1,000+ pieces, $1.20–$2.00 per piece.
The tiers above give you a realistic starting range, but if you're sourcing for resale or ongoing production, a few other factors matter just as much as the per-piece number.
Buyers comparing sourcing countries usually end up weighing four options: China, India, established Western/Japanese brands, or Southeast Asian suppliers.
This is where the bulk of the world's 6200 series bearings are actually produced, and it isn't only about labor cost — the whole supply chain sits in one place. Steel, forging, grinding, heat treatment, and packaging are all clustered in the same industrial regions, cutting out a lot of the logistics and lead-time overhead you'd face sourcing components separately elsewhere. That, combined with sheer production scale, is what keeps per-piece cost competitive even at moderate order volumes.
SKF, NSK, NTN and comparable brands typically price 3–8x higher than equivalent Chinese-made bearings. You're paying for brand reputation and, in some cases, tighter tolerance control — worthwhile for precision or safety-critical applications, generally overkill for general industrial or appliance use.
Labor costs are competitive, and brands like NBC have a strong domestic presence, but the supply chain isn't as vertically integrated or scaled as China's — so the cost advantage tends to shrink, or disappear, once you're ordering at real bulk volumes.
A lot of what's labeled as Southeast Asian supply is actually re-export or final assembly of Chinese-made components, often set up specifically to work around tariffs rather than genuine local manufacturing. Pricing here isn't usually better — it's a routing decision, not a cost decision.
Bottom line: for standard 6200 series bearings at commercial/industrial grade, China is generally the most cost-effective source once you weigh supply chain depth, production scale, and stock availability against the alternatives — which is a big part of why it's where most global buyers end up sourcing from regardless of where they started looking.
| Model | Size (mm) | Retail | 10–99 pcs | 100–999 pcs | 1,000+ pcs |
|---|---|---|---|---|---|
| 6200ZZ | 10×30×9 | $2 – $6 | $0.80 – $1.50 | $0.35 – $0.60 | $0.15 – $0.30 |
| 6201ZZ / Z / 2RS | 12×32×10 | $2 – $6 | $0.80 – $1.60 | $0.35 – $0.65 | $0.16 – $0.32 |
| 6202ZZ | 15×35×11 | $2.50 – $7 | $0.90 – $1.80 | $0.40 – $0.70 | $0.18 – $0.35 |
| 6203ZZ | 17×40×12 | $3 – $8 | $1.00 – $2.00 | $0.45 – $0.80 | $0.20 – $0.40 |
| 6204ZZ / Z / 2Z | 20×47×14 | $3.50 – $9 | $1.20 – $2.40 | $0.55 – $0.95 | $0.25 – $0.48 |
| 6205ZZ / 2RS | 25×52×15 | $4 – $10 | $1.50 – $2.80 | $0.65 – $1.10 | $0.30 – $0.55 |
| 6206ZZ / 2RS | 30×62×16 | $5 – $12 | $1.80 – $3.30 | $0.80 – $1.35 | $0.38 – $0.68 |
| 6207ZZ | 35×72×17 | $6 – $15 | $2.20 – $4.00 | $1.00 – $1.70 | $0.48 – $0.85 |
| 6208ZZ | 40×80×18 | $7 – $18 | $2.80 – $5.00 | $1.20 – $2.10 | $0.60 – $1.05 |
| 6209ZZ | 45×85×19 | $8 – $20 | $3.20 – $5.80 | $1.40 – $2.40 | $0.70 – $1.20 |
| 6210ZZ | 50×90×20 | $9 – $22 | $3.60 – $6.50 | $1.60 – $2.70 | $0.80 – $1.35 |
| 6211 | 55×100×21 | $11 – $26 | $4.50 – $8.00 | $2.00 – $3.30 | $1.00 – $1.70 |
| 6212ZZ | 60×110×22 | $13 – $30 | $5.50 – $9.50 | $2.40 – $4.00 | $1.20 – $2.00 |
These are indicative ranges for standard commercial-grade chrome steel bearings, based on typical global market pricing. Your actual quote will depend on exact grade, seal type, packaging, and destination.
Retail prices bake in individual packaging, small-batch handling, distributor markup, and sometimes brand premiums. Factory-direct wholesale strips most of that out, so the per-piece gap can easily be 5–10x for the exact same bearing.
ZZ (double metal shield) and Z (single metal shield) are usually priced close together, with Z running slightly cheaper. 2RS (rubber seals on both sides) tends to sit a bit above ZZ, since the rubber seal material and molding step add a small amount of cost — the gap is minor per piece but adds up on large orders.
No — despite the similar name, 626ZZ (6×19×6 mm) belongs to the 600-series miniature bearings, not the 6200 series. It's priced very differently, generally well under $1 even at retail, since it's a much smaller part with a different production line.
Usually, yes. A named brand like NBC (India) or HCH typically sells at a premium over an equivalent generic factory-direct bearing of the same commercial grade, since part of the price covers brand certification, traceability, and QC documentation rather than the raw material itself.
For standard 62xx sizes, real wholesale pricing usually starts around 500–1,000 pieces per model, though this varies by supplier and by size.
Most established suppliers allow this, especially for a first order. Some offer it free, some charge a small fee — confirm this upfront rather than assuming.
Yes, this is common. You don't need to hit MOQ on every single size individually if the combined order volume makes sense for the supplier.
Usually, yes, above a certain order volume. It's worth asking your supplier directly what that threshold is before assuming it's included.
Buying in volume?
Want to test before you commit?
Request Free Sample
Explore the pros, cons, and typical applications of deep groove ball bearings. Learn how to choose the right type for motors, pumps, and industrial machinery.
A procurement-focused guide to 10 trusted deep groove ball bearing factories in China — company background, specialties and how to pick the right DGBB supplier for your application
Compare the top 10 deep groove ball bearing manufacturers and suppliers for 2026 — SKF, NSK, NTN, Timken, Schaeffler & more. Get specs, MOQs & a fast quote today.
